Content Status

Type

Linked Node

H5Content
Content
  • Gloves are made for protecting the hands of health professionals from contaminated and infectious surfaces.
  • Lab staff must wear gloves for all the procedures that involve direct or accidental contact with infectious material​​.
  • Gloves are made for single-use (disposable gloves) and should not be re-used​ (see Figure 1)
  • ​Gloves are made from vinyl, latex or nitrile​.
  • For the staff who are allergic to latex and when performing PCR, nitrile gloves should be available ​for use.

​​

Figure 1: Disposable Gloves 

 

 

Do’s when using gloves 

  • Staff must select and use the right kind of glove for the job they are going to perform.
    • Always use the correct size of gloves. Staff regularly need to check the fitness and size suitable for them.
    • Gloves must be resistant to the chemical used during the procedure.
  • Staff must inspect their gloves before using them​.
  • Before wearing gloves, staff must remove any rings, watches, or bracelets that might cut or tear the gloves.​
  • If gloves are torn during a procedure, replace them immediately ​(Figure 2).

 

Figure 2: Torn gloves need immediate replacement

 

 

  • Staff must wear double gloves when working with potentially hazardous materials in the biosafety cabinet.
  • Staff must pull the gloves over the cuff of the lab gown for maximum protection.
  • Staff must change the gloves: 
    • At the end of the task
    • If gloves are soiled/punctured
  • Soiled gloves must be discarded in the bag provided for waste disposal. 
  • Gloves guard against infection through cuts and abrasions on the hands. Cuts and abrasions must be covered with a sticking plaster and/or suitable barrier dressing at all times while in the laboratory
  • Cryo gloves should be used while handling deep freezers and cotton gloves should be use while handling the autoclave

Don’ts when using gloves

  • Contaminated gloves must not be used to handle or to operate equipment (e.g., microscope or telephone), that would otherwise never become contaminated.
  • Staff must never wear gloves outside the laboratory.
  • After wearing gloves, staff must avoid/limit touching any surface

 

Resources

 

 

Kindly provide your valuable feedback on the page to the link provided HERE

Content Creator

Reviewer